Hitachi AMS 2500 Getting Started Manual page 27

Figure 1-22: Create or Select RAID Group Page
d. Create a new RAID group or use ones that already exist:
To create a new RAID group:
• Select Create a new RAID group if it is not selected.
• Use the drop-down lists to select a drive type, RAID level, and data
+ parity (D+P) combination for the RAID group.
To use RAID groups that already exist:
• Select Use an existing RAID group.
• Select a RAID group from the drop-down list.
e. Click Next. The page in
Figure 1-23: Create or Select Logical Units Page
Hitachi AMS 2500 Getting Started Guide
Figure 1-23 appears.
25