Hitachi AMS 2500 Getting Started Manual page 23

Set Up Host Ports
a. From the Set up Host Ports page, enter configuration information for
each fibre channel port that will be used.
Port Address
Transfer Rate
Topology
b. Click Next to display the Set up Spare Drive page.
Configuring Spare Drives
The Set up Spare Drive page shows all the spares that can be used in case
one of the drives fails. Select the drives you want to use as spares. If the
drives exceed what can be shown in the Available Drives area, use the
controls at the top of this area to display other pages of drives.
Figure 1-18: Set Up Host Ports Page
Table 1-3: Configuring Fibre Channel Ports
Field
Enter the address for the fibre channel port.
Select Auto to automate the data transfer rate, or
select a fixed data transfer rate form the drop-down
list.
Select whether the port will be used in a loop or point-
to-point topology.
Hitachi AMS 2500 Getting Started Guide
Description
21