SonicWALL NSA 2400 Getting Started Manual page 50

4. Click the Wireless tab.
• In the Wireless Settings section, select Only allow
traffic generated by a SonicPoint to allow only traffic
from SonicWALL SonicPoints to enter the WLAN Zone
interface. This provides maximum security on your
WLAN. Uncheck this option if you want to allow any
traffic on your WLAN Zone regardless of whether or
not it is from a SonicPoint.
• Select SSL VPN Enforcement to require that all traffic
that enters into the WLAN Zone be authenticated
through a SonicWALL SSL VPN appliance.
Note:
SSL VPN Enforcement allows the added security of
one-time passwords when using a SonicWALL SSL
VPN appliance.
• In the SSL VPN Server list, select an address object
to direct traffic to the SonicWALL SSL VPN appliance.
• In the SSL VPN Service list, select the service or
group of services that you want to allow for clients
authenticated through the SSL VPN.
• If your wireless network is already running WiFiSec,
you can select WiFiSec Enforcement to require that
all traffic that enters into the WLAN Zone interface be
either IPsec traffic, WPA traffic, or both.
Note:
If you have configured WPA2 as your authentication
type, you do not need to enable WiFiSec.
If you have enabled WiFiSec Enforcement, you can
specify the following:
• Select WiFiSec Exception Service to select services
that are allowed to bypass the WiFiSec enforcement.
• Select Require WiFiSec for Site-to-Site VPN Tunnel
Traversal to require WiFiSec security for all wireless
connections through the WLAN zone that are part of a
Site-to-Site VPN.
• If you wish to run WPA or WPA2 in addition to
WiFiSec, you can select Trust WPA/WPA2 traffic as
WiFiSec to accept WPA and WPA2 as allowable
alternatives to WiFiSec.
• Under SonicPoint Settings, select the SonicPoint
Provisioning Profile you want to apply to all
SonicPoints connected to this zone. Whenever a
SonicPoint connects to this zone, it will automatically
be provisioned by the settings in the SonicPoint
Provisioning Profile, unless you have individually
configured it with different settings.
5. Optionally configure the settings on the Guest Services
tab. For information about configuring Guest Services, see
the SonicOS Enhanced Administrator's Guide.
6. When finished, click OK.
SonicWALL NSA 2400 Getting Started Guide Page 49