1.10.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the floppy disk drive (FDD) signal cable. Insert one
end of the cable to this connector, then connect the other end to the signal
connector at the back of the floppy disk drive.
•
Pin 5 on the connector is removed to prevent incorrect cable connection
when using an FDD cable with a covered Pin 5.
•
The floppy disk drive cable is purchased separately.
P5KPL SE
P5KPL SE Floppy disk drive connector
2.
Speaker connector (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
P5KPL SE
P5KPL SE Speaker Out Connector
ASUS P5KPL SE
FLOPPY
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
SPEAKER
PIN 1
1-27