5.
Position the CPU over
the socket, making sure
that the gold triangle is
on the bottom-left corner
of the socket. The socket
alignment key should fit
into the CPU notch.
6.
Close the load plate (A), then push
the load lever (B) until it snaps into
the retention tab.
The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
The motherboard supports Intel
SpeedStep
1-10
Alignment key
Gold triangle mark
®
Technology (EIST), and Hyper-Threading Technology.
®
B
LGA775 processors with the Enhanced Intel
Chapter 1: Product introduction
A