Starting The Engine; Cold Start At Low Temperatures - Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions

STARTING THE ENGINE

1) Turn key (1) in the ignition switch to ON (the hum
you may hear when key is turned to ON is caused
by the fuel pump pressurising the delivery system),
and wait until the dashboard CHECK has finished;
2) pull clutch lever (2);
3) shift gear pedal (3) to neutral;
4) check that the throttle control (4) is fully closed.
Note*:
The engine control unit has a start-
up strategy that only works if the
throttle control is fully closed.
5) Check that button (5) is in the out position and then
press the start button (6).
6) Release the clutch lever (2).
Note*:
A safety switch is mounted on the clutch lever support
that allows you to start the engine ONLY when the gear-
box is in neutral or when the gear is engaged and the
clutch lever pulled.
There is a switch on the side stand that turns off the en-
gine when the clutch is released with the gear engaged
and the side stand lowered.
IMPORTANT
NEVER START ENGINE WITH BATTERY DIS-
CONNECTED FROM CIRCUIT.
2
IMPORTANT NOTE IN CASE OF COLD START AT LOW TEM-
PERATURES
We recommend idling for a short time to warm up the
engine.
This allows oil to reach all points that need lubricating
and coolant to warm up to regular operating tempera-
ture.
Avoid warming up the engine for too long.
SPECIFICATIONS - OPERATION - MAINTENANCE
N
1
5
6
3
4
EN - 23