Configuring Connection Using Rendezvous (Mac Os X 10.3); Initializing The Printer Driver; Configuring The Optional Environment Of This Machine - Olivetti d-COLOR MF3300 Operations

3.1 Preparation for printing (Bonjour connection)

Configuring connection using Rendezvous (Mac OS X 10.3)

Add the printer automatically detected by Rendezvous to the PC.
1
From [Macintosh HD] (hard disk of the system) - [Applications] - [Utilities], double-click [Printer Setup
Utility] or [Print Center] to open it.
2
When the [You have no printers available.] window appears, click [Add]. When the [Printer List] appears,
click [Add].
% If available printers have already been specified, the [You have no printers available.] window does
not appear.
3
Select [Rendezvous] as the connection method.
Connected printers are detected.
% If no printers are detected, restart this machine.
4
From the [Name] list, select the desired printer for Rendezvous connection.
% To check the printer name, select [Network] - [Bonjour Setting] in the administrator mode of Web
Connection.
% By default, ( ) at the end of the printer name corresponds to the last three bytes of the MAC address.
5
Manually select the printer driver.
% In [Printer Model:], select [GENERIC], then click the driver of the desired printer from the model list.
6
Click [Add].
The addition process of the printer is then completed. Then, proceed to the [Installable Options] window
to configure the optional environment for this machine. For details, refer to page 3-7.
3.1.4

Initializing the printer driver

Configuring the optional environment of this machine

When you use this machine for the first time, properly configure the printer driver so that it contains informa-
tion such as the options installed on this machine.
1
Open the [Print & Fax] (or [Print & Scan]/[Printer Setup Utility]/[Print Center]) window.
% The [Print & Fax] or [Print & Scan] window can be opened from [System Preferences...] in the Apple
menu (Mac OS X 10.4 or later).
% The [Printer Setup Utility]/[Print Center] window can be opened from [Macintosh HD] (hard disk of
the system) - [Applications] - [Utilities].
2
Display the [Printer Information] window.
% For the [Print & Fax]/[Print & Scan] window, click [Options & Supplies...] (Mac OS X 10.5 or later) or
[Printer Setup...] (Mac OS X 10.4).
% For the [Printer Setup Utility]/[Print Center] window, click [Show Info] of the [Printer] menu.
3
Display the [Installable Options] window.
% In Mac OS X 10.5 or later, click [Driver].
% In Mac OS X 10.3/10.4, select [Installable Options].
4
Change the settings according to the options installed on this machine.
5
Click [OK] or [Apply Changes] to close the [Printer Information] window.
d-Color MF 3300/3800
3
3-7