Mounting Examples; Inserting The Micro Sd Card - Navig8r NAVSPORT1080 User Manual

MOUNTING EXAMPLES

HANDLE BAR Mount
HELMET Mount
SUCTION CUP Mount

INSERTING THE MICRO SD CARD

Carefully push the memory card into the card slot, as shown in the diagram below (using your fingernail).
The Micro SD card will "click into place". To take the memory card out, gently press the end of the memory
card inward using your fingernail until a click is heard. An internal spring will then release the card.
Note: This camera has no built-in memory. A memory
card is needed for operation.
Note 2: High Definition and High Frame Rate video
capture devices, place huge demands on memory
cards. Pending your user settings, it is recommended
that a CLASS 10 SD Card be used to avoid Read/Write
complications, which will appear as an error message on the screen during use. If you are not sure, please
test any lower class cards (Read/Write speed) in the device before use.
8