Handlebar / Seatpost Mount; Helmet Mounting Kit - Navig8r NAVSPORT-WF2 User Manual

HANDLEBAR / SEAT POST MOUNT
1. Connect the bar clamp to your handlebar (3, 4).
2. Connect your camera case to the screw (1) securely.
3. Loosen the tilt knob (5) and adjust.
4. After positioning tighten all clamp nuts.

HELMET MOUNTING KIT

Helmet Belt
Note: This bracket will only work with vented Helmets such as bicycle helmets.
Use the supplied strap to loop through the holes in your helmet and then through
the long slots on the helmet mount. Tighten as required. Then observe the steps in
the previous section regarding adjustment.
MOUNTING EXAMPLES
Locking Wheel
Bar Clamp
Nuts
Locking
Wheel
Tilt
Knob
HANDLE BAR Mount
HELMET Mount
SUCTION CUP Mount
WIFI 60FPS 1080P FHD
Case screw Mount
Helmet Mount
Tilt Knob
-20 Screw
Screw
1
4
Tilt
Knob
Bar Clamp
Search YOUTUBE for Navig8r
Sportscam - How to prepare
your helmet mount to view
our instructionalvideo or
click this link if you are
viewing this file online
https://www.youtube.com/
watch?v=EgLbwFummrY
11