Cybernet i-One 17 User Manual page 31

blank or the screen is
too dark.
Mouse is not working. 1. Check if the mouse wireless receiver is properly
Keyboard is
working.
USB device is
working.
Unable to shut off the
computer.
front panel of the computer monitor. Should problems
persist, contact the Customer Support Center.
connected to the USB port located at the rear of the
unit. The USB cable must be connected to the USB
port.
2. This can occur when there is a problem with the
mouse device administrator. Click [Start]-[Control
panel]-[Performance and maintenance]-[System]
and then click on [Device administrator]-[Mouse
and other pointing devices] in 'hardware' tab.
Remove the mouse item and restart the computer.
not 1. Check if the keyboard wireless receiver is properly
connected to the USB port located at the rear of the
unit. The USB cable must be connected to the USB
port.
2. When the system is down, this may occur. Restart
the computer and check whether the keyboard is
working.
not 1. If the USB device manufacturer provides the
driver, install the driver first and restart the
computer.
2. Disconnect the USB device and then reconnect it
and check if it works properly. (Re-execute the
plug-and-play functionality)
3. This may be caused if the system fails to read the
USB device or USB device administrator, restart the
computer and check if it works properly.
4. To check if there is the problem with the USB
device, try connecting it to another computer. If it
works fine with the other computer, contact the
Customer Support Center.
This could stem from a number of reasons. First, turn
off the computer by pressing the power button for