Product Characteristics - Peg-Perego Primo Viaggio tri-fix Instructions For Use Manual

EN_English
Thank you for choosing a Peg-Pérego
product.
• Peg-Pérego S.p.A. is ISO 9001 certified.
• This certification offers customers and
consumers a guarantee of transparency
and confidence in the company's mode of
operation.

Product characteristics

• The "Primo Viaggio tri-fix" group 0+ car safety seat has
been subjected to all safety tests and is approved under
European standard ECE R44/04, for children of weight from
0 to 13 kg (0 to 12-14 months).
• IMPORTANT: "Primo Viaggio tri-fix", group 0+, must
be installed facing opposite to the normal forward
movement of the car, on seats without airbags. Do
not install "Primo Viaggio tri-fix" on seats that face
backwards or sideways.
• "Primo Viaggio tri-fix" has an "Adjustable Side Impact
Protection System": this offers improved protection against
side impacts with the "simultaneous system" for headrest-
harness adjustment.
• "Primo Viaggio tri-fix" is approved for installation in cars
without a base support or with two types of base as
required (the use of a seat base offers improved safety):
"Adjustable Base" or "Isofix Base" (check that the vehicle is
fitted with the Isofix system -a list of car models fitted with
the system is provided with the product).
WARNING
• Read the instructions carefully before use and keep
them in the holder provided for future reference.
Failure to closely follow the installation instructions for
the car safety seat will put your child at risk.
• The assembly and installation operations must be
conducted by adults.
• Avoid inserting fingers into the mechanisms.
• Install this group 0+ car safety seat facing opposite to the
normal forward movement of the vehicle.
• Death or serious injury can result if this car safety seat is
installed on seats with airbags.
• Eliminate danger by disabling airbags surrounding the
position of the car safety seat.
• In the case of rotating or movable seats it is important
to install this safety seat facing opposite to the normal
forward movement of the vehicle.
• When travelling take special care to make sure that luggage
or other objects do not injure the child in the safety seat in
the case of accidents.
• Do not use installation methods different from those indicated.
This would result in the risk of detachment from the seat.
• Car safety seat, group 0+, "Universal" approved under
European standard ECE R44/04 for children of weight from
0 to 13 kg (0 to 12/14 months). Suitable for installation on
the majority of vehicle seats, but not all.
• Group 0+ child car seat with class E semi-universal Isofix base.
• The car safety seat can be correctly installed if the vehicle's
use and maintenance manual indicates compatibility with
"Universal" group 0+ restraint systems.
• This safety seat is classed as "Universal" in compliance with
stricter approval criteria than previous models that do not
have approval labels.
• The safety seat can only be used in approved vehicles, fitted
with static or inertia-reel three-point seat belts, approved
under regulation UN/ECE no. 16 or equivalent standards. It
must not be used with two-point or lap seat belts.
• To install the car safety seat, pass the three-point seat belt
through the slots in the safety seat indicated with light
blue markings. Do not use installation methods different
from those indicated. This would result in the risk of
detachment from the seat.
• Ensure that the three-point car seat belt fixing the safety
seat is always taut and not twisted. It should be replaced in
the case of heavy stress as a result of an accident.
• Never leave the child unattended in the safety seat:
observe him/her even when sleeping.
• Never remove the child from the seat while the vehicle is in