Table of Contents
Advertisement
DESCRIPTION:
The Professional Sound Corporation Power Star power distribution system has
been designed and built specifically to provide clean, quiet, reliable power for
your complete digital audio recording package. This new design easily handles
the heavy power requirements of today's digital recorders and mixers. When
connected to a sealed lead acid battery it can output 12Vdc at up to 24 amps.
The PSC Power Star contains a high capacity, on board battery charger that is
designed to operate from 100Vac to 240Vac or from 127Vdc to 370Vdc for
worldwide operation without adjustment.
Each of the PSC Power Star's 10
output connectors are equipped with dedicated EMI/RFI output filters to ensure
clean, noise-free power for your equipment. In addition, each of the 10 output
connectors are individually Polyfuse protected and are monitored for proper
voltage output and over current faults. The status of all of these monitors can be
viewed from the front panel LEDs. A Green LED indicates proper operation, a
Yellow LED, indicates a tripped Polyfuse (overload condition). The PSC Power
Star will operate as an un-interruptible power supply when used with a re-
chargeable battery.
REMOTE MONITOR/CONTROL BOX:
The PSC Power Star comes with a small remote monitor and control box. This
box contains both a DC Volt Meter and a DC Current Meter. In addition, it
contains the Power Star's main power Switch.
Each unit is provided with a 4'
(1.3M) cable to allow the remote monitor/control box to be mounted in a
convenient place. The DC Voltage Meter reads the battery voltage when a
Advertisement
Table of Contents
