Removing The Battery Pack - Toshiba Satellite C50-A Series User Manual

This section explains how to remove and install the battery pack, and
begins with the removal process which is detailed through the following
steps.

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1.
2.
3.
4.
5.
6.
1. Battery lock
2. Battery release latch
User's Manual
Do not remove the battery pack while the computer is in Sleep Mode.
Data is stored in RAM, so if the computer loses power it could be lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not touch the battery release latch while holding the computer or
the battery pack might fall out due to the unintentional release of the
battery release latch and cause injuries.
Save your work.
Turn off your computer - ensure that the Power indicator is off.
Remove all cables and peripherals that are connected to the
computer.
Close the display panel and turn the computer upside down.
Slide the battery lock into its unlock ( ) position.
Slide and hold the battery release latch to disengage the battery pack
and then lift it up to remove it from the computer.
Figure 4-5 Releasing the battery pack -1
Figure 4-6 Releasing the battery pack -2
1
3
1
3. Battery pack
3
2
2
4-26