Pioneer PDP-425CMX Technical Manual page 97

2) Screen size
Screen size
DOT BY DOT
The input signal corresponds 1:1 with the
pixels of the Plasma Display for an accurate
reproduction.
4:3
For a 4:3 source, roundness can be accurately
reproduced (In order to prevent burning of the
screen, this screen size should not be used
unless required).
FULL
This is for wide-screen video (squeeze) (For a
16:9 source, roundness is nearly accurate).
ZOOM
For a video signal, this is for a cinesco
(cinema scope) size video.
WIDE
This is for reproducing the 4:3 portion of a
4:3 source or 16:9 source on the entire
screen (roundness near the center is nearly
accurate).
UNDERSCAN
This is used by a broadcast station and the
like for viewing the portion outside the
normal effective display range.
2.35:1
Displays 2.35:1 squeezed image full-screen
without black border. However, portions of
image at right and left edges are cut.
14:9
Displays expanded 4:3 screen image without
distortion.
• The screen size settings are stored in memory for each function and for each input signal. Up to eight (8) sizes can be stored in
memory for each function.
Personal computer signal
100
100
100 100
100
100
100 100
100
100
100 100
Before Beginning Adjustments
Remarks
Can be selected only during 1024x768
(XGA) signal input.
Is 5:4 during 1280x1024 (SXGA) signal
input.
Can be selected only during signal input
other than 1024x768 (XGA).
When selecting the underscan by switching
the screen size, please set to UNDERSCAN:
ON using PRO USE of the integrator mode.
Unit: % (percent)
97