Pioneer PDP-425CMX Technical Manual page 3

15) Auto Set Up Mode Setting ....................... 147
16) Screen Position, Clock Frequency and
Clock Phase Adjustment .......................... 148
17) Auto Function Mode Setting .................... 150
18) Timer Setting ............................................ 151
19) Program Timer Setting ............................. 151
20) Subscreen Mode Setting .......................... 152
21) PIP DETECT Setting ................................. 153
5.4 Integrator Mode ....................................................... 154
5.4.1 About the Integrator Mode ............................. 154
5.4.2 Example of Integrator Mode Operation .......... 155
5.4.3 Adjustment and Setting in the Integrator Mode ... 156
1) PICTURE Adjustment ............................... 156
2) WHITE BALANCE Adjustment ................. 157
3) COLOR DETAIL setting ............................ 158
4) GAMMA Setting ....................................... 159
5) SCREEN (Screen Position) Adjustment .... 160
6) Brightness Enhancement (BRT. ENHANCE)
Setting at the Center of the Screen .......... 161
7) SUB VOLUME Setting .............................. 162
8) Program Timer Setting ............................. 163
9) SCREEN MASK Setting ............................ 164
10) SIDE MASK Setting .................................. 165
11) VIDEO WALL Setting ............................... 166
12) BAUD RATE Setting ................................. 170
13) Assigning an ID ......................................... 171
14) Cooling Fan Control Setting ...................... 172
15) OSD Display Setting ................................. 173
16) FRONT INDICATOR Setting ..................... 175
17) COLOR MODE Setting ............................. 176
18) PRO USE Setting ...................................... 177
19) FRC Setting .............................................. 179
20) POWER ON MODE Setting ...................... 181
21) SEAMLESS SW Setting ............................ 182
22) MIRROR MODE Setting ........................... 183
23) MULTISCREEN Setting ............................ 185
5.4.4 PICTURE, White Balance and SCREEN Position
Adjustment Values Memory Area Tables ....... 187
5.5 RS-232C Adjustment ................................................ 192
5.5.1 About the RS-232C Adjustment ...................... 192
5.5.2 Interface .......................................................... 193
5.5.3 Combination Connection ................................. 194
5.5.4 ID Assignment ................................................ 195
5.5.5 List of RS-232C Commands ............................ 197
5.5.6 QUEST Commands ......................................... 203
5.6 Screen Burning ........................................................ 210
5.7 Precautions on Connecting Camera Images ......... 211
5.8 Concerning frame delay (lip sync) .......................... 211
PRECAUTIONS
6.1 Precautions ............................................................... 212
MAINTENANCE .................................................................. 213
CAUTION
• To prevent injury and material damage, thoroughly read
this manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing
so will lead to water seepage into the system, resulting
in fire or electric shock.
• Be especially careful when working around parts of the
system that have sharp edges.
• When performing installation work from a height, take
suitable precautions to guard against falling. Set up a
barrier around the work site to prevent accidentally
dropped objects that can injure people standing or
walking below. Tampering with the unit may result in
fire or electrical shock.
• Keep all foreign objects out of the unit. Tampering with
the unit may result in fire or electrical shock.
• Observe the following operating environmental
limitations:
Temperature: 0 °C to 40 °C
Humidity: 20 % to 80 %
• Install the unit only in properly ventilated areas.
Table of Contents
3