After assembling, connect the stand to the floor to prevent it from falling over.
7 Stabilizing to the floor
÷ Use screws (sold separately) to attach and stabilize
the stand.
Table Top Stand: PDK-TS01
7 How to use the stabilization bolts
1. Attach the stabilization bolts that come with the stand
to the Plasma Display.
2. Stabilize the display by attaching it to a wall or a
standing beam with a strong cord.
(Repeat the same steps laterally to stabilize the
assembly to the left and right.)
Use cord and hooks that are available on the market
(sold separately).
1
2
63