Color Mode Setting - Pioneer PDP-425CMX Technical Manual

Integrator Mode

17) COLOR MODE Setting

In addition to the normal operation mode (NORMAL), this display has a (STUDIO) mode for use in a TV studio. The
adjustment values for 'PICTURE' and 'SCREEN' can be set independently.
(Refer to section 5.4.4, "PICTURE, White Balance and SCREEN position Adjustment Values Memory Area Tables"
(pg. 187).)
Change the settings to meet the desired usage.
Factory setting: COLOR MODE: NORMAL
1 Enter the integrator mode.
(Refer to section 5.4.1, "About the Integrator Mode" (pg. 154).)
2 Select 'OPTION'.
3 Place the cursor on 'COLOR MODE' then press the [SET]
button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
3
When the 'COLOR MODE' setting is changed, all input
functions as well as the 'PICTURE' and 'SCREEN'
adjustment values for the input signal are changed.
The 'COLOR MODE' setting is common for all inputs.
176
NORMAL
2
STUDIO
Screen 3
I N T E G R AT O R
P I C T U R E S C R E E N S E T U P
F A N C O N T R O L
O S D
F R O N T I N D I C AT O R
C O L O R MOD E
P R O U S E
F R C
CHANGE
SET
I N P U T 1
O P T I O N
:
A U T O
:
O N
:
N O R M A L
:
O N
EXIT
MENU