JVC AX-V5BK Instructions Manual page 27

From the remote control:
If you have already set the center speaker size following the procedure described on page 13, you can use the
remote control for Dolby Surround preparation.
SURROUND
1. Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH
ON/OFF
LOGIC, HALL) lights up on the display.
The previous mode is recalled (at its previous settings) and is shown on the display.
Each time you press the button, the surround mode turns on and off.
AUDIO
2. Press AUDIO CONTROL so that 10 keys work for adjusting the sound.
CONTROL
3. Press SURR MODE until "PROLOGIC" or "3CHLOGIC" whichever you want appears on the
display.
Each time you press the button, the surround modes change as follows:
SURR MODE
6
The indicator of the selected surround mode lights up in turn as you select the surround modes.
4. Press DELAY to adjust the delay time of the rear speaker output.
DELAY
5
Each time you press the button, the delay time changes as follows:
Note:
When you have selected "3CHLOGIC," you cannot adjust the delay time.
5. Press TEST to start checking the speaker output balance.
TEST
4
"TEST" starts flashing on the display, and a test tone comes out of the speakers in the following
order:
Notes:
• No test tone comes out of the rear speakers when you have selected "3CHLOGIC."
• No test tone comes out of the center speaker when you select "PHANTOM" or "OFF" for the center
mode.
– +
REAR
6. If necessary, adjust the speaker output balance as follows:
8 9
• To adjust the rear speaker output level, press REAR+/–.
• To adjust the center speaker output level, press CENTER +/–.
Pressing – decreases the output level up to –10 dB.
– +
CENTER
Pressing + increases the output level up to +10 dB.
10 +10
Notes:
• The sound levels of the left and right rear speakers will be the same.
• You cannot set the sound level of the rear speakers when you have selected "3CHLOGIC."
• You cannot set the sound level of the center speaker when you select "PHANTOM" or "OFF" for the
center mode.
7. Press TEST again to stop the test tone.
TEST
4
PROLOGIC
3CHLOGIC
DELAY 1 DELAY 2
Left front Center
speaker
speaker
Rear
speakers
HALL
DELAY 3
Right front
speaker
Page 22