Basic Operations; Turning The Power On And Off (Standby); Selecting The Source To Play - JVC AX-V5BK Instructions Manual

Basic Operations

Turning the Power On and Off (Standby)

STANDBY
STANDBY/ON
STANDBY
STANDBY/ON
AUDIO

Selecting the Source to Play

SOURCE
CD
TAPE
TUNER
VCR
VIDEO
PHONO
Page 9
The following operations are commonly used when you play any sound source.
On the front panel:
To turn on the power, press STANDBY/ON
The STANDBY lamp goes off. The name of the current source appears on the display.
SLEEP SEA
PRO LOGIC 3CH LOGIC HALL
Current source name appears
To turn off the power (into standby mode), press STANDBY/ON
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the current source appears on the display.
To turn off the power (into standby mode), press AUDIO again.
The STANDBY lamp lights up.
Note:
Pressing STANDBY/ON again turns off the power (into standby mode) and lights the STANDBY lamp.
A small amount of power is consumed in standby mode. To turn the power off completely, press
to set it in the — OFF position on the front panel.
On the front panel:
1. Press SOURCE so that Control % % % % % / fi fi fi fi fi buttons work for selecting the source.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until the source name you want appears on the display.
From the remote control:
Press one of the source button directly.
CD* Listen to the CD player.
TAPE* Listen to the cassette deck connected to the TAPE jacks.
TUNER* Listen to the radio.
VCR View the video component connected to the VCR jacks.
VIDEO View the video component connected to the VIDEO jacks.
PHONO* Listen to a record.
Note:
* When you press one of the source buttons on the remote control marked above with an asterisk, the amplifier
automatically turns on.
.
L R
LOUDNESS
VOLUME
Current volume level is shown here
VOLUME
again.
POWER