Congratulations on your selection of the Imperial video matrix
switch. The Imperial is a 12x8 high definition component video
matrix switch, with pass-through outputs for stacking multiple
units. The Imperial can be stacked up to 12 units to build a 12x96
matrix system.
Both products are very similar in function, so this single user
manual will guide you through both products.
Imperial Features:
• 12 inputs of component video (YPbPr)
• 12 fully buffered pass-through outputs
• 8 matrix switch outputs
• High bandwidth matrix section (140 MHz) provides full
1080p to each matrix output.
• Pass-through outputs utilize high accuracy and high
bandwidth (400MHz) buffers to allow up to 12 units to be
stacked.
• Attractive enclosure featuring brushed aluminum and high
gloss acrylic front, with optional black or silver finish.
• Universal AC input power, 90-240VAC 50/60Hz with
standard IEC320 receptacle.
• All gold plated RCA connectors ensure a long life without
corroded connectors.
Imperial Matrix Switch User's Guide (DOC42-00010-A_NeoPro-Imperial.doc)
Introduction
3