Doro Primo 305 User Manual page 46

Note
The active profile is ticked off in green. Profile
changes are only applied if the profile is
activated!
1. Press Menu, go to Settings and press OK.
2. Select Signal tones and press OK.
3. Select one of the profiles and press
Option.
4. Select one of the following options and
press Select:
Activate: The profile is activated with the
respective settings.
Adjust: (not available for profile Silent) Edit
settings for the selected profile. Select
one of the following items with ▲▼ and
press Option. Select Change, carry out
the settings and press OK. Press
Option, select Save and press Select
after all settings are done.
Ring type – Select between single
signal and repeat.
Incoming call – Select the melody for
incoming calls.
Ring tone volume - Select the volume
for incoming calls.
42