DSC RF55O1-433 Installation Manual page 32

FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your
authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance
with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested
and found to comply with the limits for Class B device in accordance with the specifications in Subpart "B" of Part 15
of FCC Rules, which are designed to provide reasonable protection against such interference in any residential instal-
lation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to television or radio reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.
The user may find the following booklet prepared by the FCC helpful: "How to Identify and Resolve Radio/Television
Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402,
Stock # 004-000-00345-4.
IC: 160A-RF550143
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
©2002 Digital Security Controls Ltd.
Toronto, Canada • www.dsc.com
Technical Support 1-800-387-3630
Printed in Canada 29034573 R001
Direct all comments con-
cerning this publication to
pubs@dscltd.com