Mitsubishi Electric FR-F740-00023 Instruction Manual page 275

Check and clear of the faults history
(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
1.
Screen at powering on
The monitor display appears.
2.
Press
setting mode.
3.
Turn
appears.
4.
Press
" "(initial value) appears.
5.
Turn
it to the setting value " ".
6.
Press
266
Operation
to choose the parameter
until (faults history clear)
to read the present set value.
to change
to set.
· Press to read another parameter.
· Press to show the setting again.
· Press twice to show the next parameter.
Display
Flicker ··· Faults history clear complete!!
The parameter
number previously
read appears.