Table of Contents
Advertisement
6 Service Mode
6.1.
Error Display
"PUSH THE RESET SWITCH" is displayed automatically on the EVF or the LCD Monitor when an undesirable condition has
occurred.
Note:
When "PUSH THE RESET SWITCH" is displayed repeatedly, service is required. Check the Error Code which is listed in the
Service Menu.
6.2.
Service Menu
When abnormal detection contents are confirmed, do the following operation. Automatic diagnosis code will be displayed. (Service
Menu)
To enter the Service Menu
Push the [PHOTO SHOT], [JOYSTICK CONTROL LEFT] and [RECORDING START/STOP] simultaneously for 3 seconds (with
no SD Card inserted).
Note:
If a Disc or SD Card is inserted, the above operation will not work.
This operation displays the following Service Menu items.
To select the Item
1. Set to Service Menu.
2. Press the [JOYSTICK CONTROL UP/DOWN] to select item [3].
3. Press the [JOYSTICK CONTROL RIGHT] to display [YES/NO] screen.
4. Press the [JOYSTICK CONTROL UP/DOWN] to select [YES].
5. Press the [JOYSTICK CONTROL CENTER].
Note:
Only perform items 3 in the Service Menu.
To exit the Service Menu
Unplug the AC Cord.
Fig. 1
29
PV-GS29PL / PV-GS39PL / PV-GS69PL
Advertisement
Table of Contents
