Table of Contents
Advertisement
5. SERVICE MODE
5.1. New Error Code Display
Conventionally, the error code has been displayed automatically on the EVF or LCD Monitor
when undesirable conditions have occurred. With the New Error Code Display, the error code
has not been displayed automatically as follows except some error codesF31(Data
Transmission Error), U10(Dew) and U11(Head Clogging).
Note:
1. The only some error codes F31, U10 and U11 has displayed
automatically on the EVF or LCD monitor as usual.
2. The Power LED also has been flashed for 1 min. when undesirable
condetions have occurred.(See below)
5.2. Viewing Error Code
When displaying the Error Code on the EVF or LCD Monitor, push the FADE/STOP and REC
START/PAUSE buttons simultaneously for more 3 seconds.
Note:
When the cassette tape is inserted, this operation will not be
10
Advertisement
Table of Contents
