Installation - Carrier TP-WEM01 Installation Instructions Manual

INSTALLATION

Installation Notes:
The maximum wire size to be used in the installation is
d
22AWG (0.50mm2) with 0.8mm insulation
No part of the control should be installed directly outdoors or
d
in a cabinet outdoors
The control assembly base should be mounted before wires are
d
attached
Thermostat location:
Approximately 5 ft. (1.5m) from floor.
d
Close to or in a frequently used room, preferably on an inside
d
partitioning wall.
On a section of wall without pipes or duct work.
d
Thermostat should NOT be mounted:
Close to a window, on an outside wall, or next to a door lead-
d
ing to the outside.
Exposed to direct light or heat from the sun, a lamp, fireplace,
d
or near other temperature- -radiating objects which could cause
a false reading.
3