Related Manuals for Carrier Cor TP-WEM01-A
Summary of Contents for Carrier Cor TP-WEM01-A
- Page 1 TP–WEM01–A Carrierr Côr™ Thermostat AC/HP Wi-Fir Thermostat Performance™ Series Installation Guide...
- Page 2 INTRODUCTION ® Welcome and from all of us at Carrier , thank you for purchasing your new Côr™ thermostat: the heart of a smarter home. Like everything else about the Côr thermostat, installing it is simple and intuitive. However, if any questions arise during your installation, we’re here to help:...
- Page 3 COMPATIBLE HEATING AND COOLING SYSTEMS Your Carrier Côr thermostat works with most centralized residential heating and cooling systems. Heating and Cooling: Up to Two Stages Heat Pumps: One or Two Stage + One or Two Stage Auxiliary Heat Gas, Oil, Electric Dual Fuel Systems –...
- Page 4 ITEMS INCLUDED IN THE BOX The Côr™ Thermostat and backplate Mounting screws and drywall plugs Installation guide, quick start guide, and wire labels Large Backplate (optional) Wire Labels Installation Guide Quick Start Guide A150042...
- Page 5 ITEMS YOU'LL NEED FOR INSTALLATION Pencil Phillips screwdriver Small flathead screwdriver Drill with a 3/16” drill bit Password for your home’s wireless network Internet-connected device, such as a smartphone, tablet or computer A150044 Tip: Review all the instructions before you start to help ensure that there are no surprises during installation...
- Page 6 Most covers snap off easily but some are attached by screws. A. If you do not have a wire connected to C, visit www.carrier.com/corsupport for Advanced Installation and Configuration Instructions. B. If you have wires connected to Rh, Rc, and C, You’ll use two breakers or switches to disconnect power in Step 2.
-
Page 7: Cooling System
STEP 2. POWER OFF YOUR HEATING AND COOLING SYSTEM Turn off the power to your heating and cooling system. You can do this either at your circuit breaker box or a switch at your indoor furnace or fan coil. Most systems have one switch, but systems with Rh, Rc, and C wires noted in Step 1 will have two switches. - Page 8 STEP 3. REMOVE YOUR OLD THERMOSTAT Using your old thermostat as a guide, use the provided wire labels identify each wire. Don’t worry about any non-connected wires. Disconnect each wire. Most thermostats’ wires are connected using screws; simply loosen each screw with a screwdriver. Remove your old thermostat base by unscrewing it from the wall.
- Page 9 STEP 4. INSTALL THE CÔR™ THERMOSTAT Gently pull the wires through the hole in the back plate. Center the wires in the back plate. Mark the mounting holes on the wall with a pencil. Drill mounting holes on the pencil marks with a 3/16” drill bit. Insert the plastic drywall anchors into the wall.
- Page 10 OPTIONAL - USING THE LARGE BACKPLATE If the small backplate does not cover the marks left by your old thermostat, you can use the large backplate instead. Remove the terminal blocks from the small backplate by squeezing the tab on the front, left side while gently pushing the back toward you.
- Page 11 When all the wires are connected, gently push any excess wire back into the wall. Y/Y1 (AUX1) A150050 Tip: If you need additional help with the wiring, refer to the wiring diagrams at www.carrier.com/corsupport...
- Page 12 STEP 6. CONNECTING THE DISPLAY With the Carrier logo positioned at the bottom, gently push the display to the backplate until you hear it snap into place. A150051 Now you can turn the power back on to your heating and cooling system.
- Page 13 STEP 7. GUIDED SETUP Now that your Côr thermostat is activated, guided setup will walk you through: 1. Equipment configuration 2. Customizing your preferences 3. Connecting to your home’s wireless network 4. Registering your thermostat online The information icon at bottom of the screen will provide helpful explanations and tips for each step in the process.
- Page 14 STEP 7. GUIDED SETUP EQUIPMENT CONFIGURATION a) The Côr thermostat needs to know how many transformers are connected to the thermostat. If you connected the Rh and Rc and C wires, select two Otherwise, select one b) The Côr thermostat automatically detects the wires you’ve connected and will ask a few questions to configure your system based on these connections.
- Page 15 STEP 7. GUIDED SETUP CUSTOMIZING PREFERENCES Now that you’ve configured your system, it’s time to customize your Côr thermostat. a) Name your thermostat by selecting a name from the list or by entering your own custom name. b) Tell the Côr thermostat whether you prefer the temperature to display in Fahrenheit or Celsius.
- Page 16 STEP 7. GUIDED SETUP WIRELESS NETWORK CONNECTION The Côr thermostat provides you the most features and energy savings when it’s connected to your home’s wireless network and your personal web portal. a) The Côr thermostat automatically detects nearby wireless networks. b) Select your network from the list and enter your network password.
- Page 17 Côr thermostat. a) On your Android or Apple smart device, download the Carrier Côr thermostat app from the app store. b) Open the app and touch register on the login screen c) Enter the four-digit code generated from your thermostat and follow the onscreen prompts to complete your registration.
-
Page 18: Troubleshooting
4. If your device still does not power on, please contact: Technical support at 1.800.CARRIER or contact contact.carrier@carrier.utc.com Find an Expert Carrier Contractor at carrier.com/dealers Tip: Visit www.carrier.com/corsupport for how-to videos, answers to frequently asked questions, and advanced installation instructions... - Page 19 Approvals This product was designed and built in accordance to RoHS directive 2002/95/EC and contains no hazardous substances as defined by this directive. FCC Compliance Commission (FCC) Compliance Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 20 RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation.
- Page 21 NOTES:...
- Page 24 1- - 800- - CARRIER Copyright 2016 Carrier Corp. S 7310 W. Morris St. S Indianapolis, IN 46231 Edition Date: 07/16 Catalog No: TP---WEM---05SI Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.