Step 5. Power On System - Carrier TP-WEM01 Installation Instructions Manual

System wiring diagrams covered are:
Conventional heating and cooling systems
d
Heat pumps (air or geothermal)
d
Boilers or radiant heat systems
d
Accessory devices: dehumidifiers, humidifiers, or ventilators
d
Attach thermostat
Push any excess wires back into the wall, and connect the thermostat
to the backplate.
Step 5. Power On the HVAC System
Power back on the HVAC equipment. The thermostat will
automatically power on. It is recommended to have the homeowner's
Wi- -Fi password handy in order to complete setup.
Follow the on- -screen instructions. The thermostat software will guide
you through the setup, which includes:
Equipment configuration (HVAC and accessories)
d
Setting preferences
d
Connecting to Wi- -Fi
d
Registering the thermostat to the online web portal
d
NOTE: The settings can be changed at any time from the menus.
Congratulations, you're done!
16