Getting Started; Checking The Supplied Accessories; Putting Batteries Into The Remote Control; Setting The Voltage Selector - JVC TH-D7 Instructions Manual

Getting started

Checking the supplied
accessories
If anything is missing, contact your dealer immediately.
• Remote control (x 1)
• Batteries (x 2)
• FM antenna (x 1)
• AM loop antenna (x 1)
• Composite video cord (x 1)
• AC plug adapter (x 1) (not supplied for the countries of the
Middle East and Thailand)
• Connection cable for iPod (x 1)
• Stand for iPod (x 1)
• Speaker cords
– TH-D7: 4 m (x 4), 10 m (x 2)
– TH-D5: 3 m (x 4), 8 m (x 2)
• Feet
– TH-D7: For surround speakers (x 8)
– TH-D5: For front and surround speakers (x 16)
• Screws (TH-D7 only): M5 x 115 mm (x 6), M4 x 25 mm
(x 4)
Putting batteries into the remote
control
R03 (UM-4)/AAA (24F) type
dry-cell batteries (supplied)
Do not expose batteries to heat or flame.
If the range or effectiveness of the remote control
decreases, replace both batteries.

Setting the voltage selector

Before plugging in, set the correct voltage for your area with
the voltage selector switch on the rear of the center unit.
Ex.: When setting to "220V-240V"
5
Connecting the speakers and
subwoofer
Center unit
Connecting the speakers and the
subwoofer to the System
To front right speaker
(SP-THD7F/SP-THD5F)
To surround right speaker
(SP-THD7S/SP-THD5S)
Connecting the speaker cords
Connect the speaker cords both to the center unit and to
each speaker.
On the center unit:
On the speaker:
• Connect the black cords to the r terminals.
• Connect the white cords to the q terminals.
To center speaker
(SP-THD7C/SP-THD5C)
To front left speaker
(SP-THD7F/SP-THD5F)
To subwoofer
(SP-THD7W/
SP-THD5W)
To surround left speaker
(SP-THD7S/SP-THD5S)
Speaker cord
Speaker cord