Cisco Catalyst Express 500 Getting Started Manual page 9

Network Settings Description
Password
Optional Settings Enter a Host Name for the switch. The
9
Click Submit to save changes and
finish basic configuration
When you click Submit, the information you entered is saved.
You have completed the initial switch setup. If you click Cancel,
the fields are cleared, and you can start over.
10
Apply Smartports roles
Immediately after you click Submit in Step 9, the Smartports
dialog window appears.
Click Yes and Submit to accept the predefined port roles. The
Smartports window appears. Here you can change the
predefined roles or apply new port roles as described below.
Click No and Submit to apply the Smartports roles yourself.
When the device manager window appears, locate the Contents
menu on the left side of the window. Click Configure and then
Smartports. Follow these steps:
1. Select a port role from the pull-down menu.
2. Click a port to apply the selected port role.
3. Click Submit to save the Smartports roles.
Enter a password. The password can be
from 1 to 25 alphanumeric characters, can
start with a number, is case sensitive,
allows embedded spaces, but does not
allow spaces at the beginning or end. In the
Confirm Password field, enter your
password again.
date and time fields are populated from
your PC.
9