D-Cell Unit For Your At&T Fiber Service Box; In Your Kit; Follow These Steps - AT&T BGW320 Simple Manual

How to Install :
D-cell Unit for your AT&T Fiber Service Box

In your kit:

• D-cell batter holder with cable
• D-cell power supply
• Power cables (2)
You will need to supply 12 D-cell alkaline batteries.
Before you begin:
Determine placement of D-cell unit near the AT&T network box (ONT).
Unit can be laid flat or mounted to wall.
Select the power cable that fits your ONT.
Completed Setup (items not to scale)
D-cell Battery Holder
New ONT Power Cable
D-cell Battery Power Supply
(Open Cover) AT&T Network Box
(ONT)
Follow these simple steps:
Unplug existing black Remove plastic cover from
1 2
power supply. bottom of power supply.
Connect new power cable to
ONT and D-cell power supply,
then plug into outlet.
ONT Power Cable
ONT
and Supply
ONT
Insert all 12 D-cell batteries Plug holder into power supply.
3 4
into the holder.
D-cell Battery Holder D-cell Battery
(Open Cover) Holder
Test the unit: Push Test Turn unit
5 6
button; LED lights will indicate testing. You will need to
power level. turn the unit back on during
a power outage.
D-Cell Battery Outlet
Power Supply
D-cell Battery
Power Supply
Off when finished
4