Method; Connecting To External Devices - Samsung HT-E5500K User Manual

Connections

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD
Red
R
White
�W�
SPEAKERS OUT
SURROUND
SURROUND
iPod LAN WIRELESS

Method 1

External Devices
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
NOTE
| |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Method 3 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (cable not supplied), connect the AUDIO In jack on the product to the AUDIO
Out jack on the external Analog component.  Select the AUX mode.
~ Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
22
|
English
D. IN
AUX VIDEO
IN OUT
OPTICAL
HDMI OUT 1 HDMI IN 2 DIGITAL FM ANT
AUDIO IN
Method 2
(Cable not supplied.)
HDMI OUT
AUX R. IPOD HDMI1
AUX VIDEO
IN OUT
OPTICAL
DIGITAL
1 HDMI IN 2
AUDIO IN
OPTICAL OUT AUDIO OUT
HDMI2 FM BT
FM ANT
Method 3
(Cable not supplied.)