4-4 Buyer-Region Code Setting Method
4-4-1 The inserting method of Region Code after replacing the Main PBA
[Reference]
- When replacing the Main PBA and System Micom should be inserted the region code.
- The set is not working properly if you don't insert the region code.
- The region code is inserted by the remote control.
1. Press the "AUX" button on the remote control.
2. Press the "TUNER MEMORY" button on the remote control during
4~5 seconds.
3. After step (2), you can see "TEST" on the VFD.
4. When you see "TEST" on VFD, Insert number "4", "6" to start
Region Code setting mode.
Samsung Electronics
Troubleshooting
TEST
4-21