Cold Start Method (Initialize Setup) - Samsung HT-D4500 Service Manual

■ By Downloaded
The By Downloaded option lets you upgrade using a fi le the product downloaded earlier but you decided not to install
immediately or a file downloaded by the product in Standby Mode (See Download in Standby Mode below).
To upgrade By Downloaded, follow these steps:
1) If upgrade software has been downloaded, you will see the software version number to the right of By Downloaded.
2) Select By Downloaded, and then press the ENTER button.
3) The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.
4) When the update is complete, the product turns off automatically, and then turns on.
NOTE
When the system upgrade is done, check the software details in the software Upgrade menu.
Do not turn off the product during the software Upgrade. It may cause the product to malfunction.
To use the By Downloaded function, your product must be connected to the Internet.
■ Download in Standby Mode
You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in
Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to
download upgrade software automatically, when you are not using it.
To set Download in Standby Mode, follow these steps:
1) Press the ▲▼ buttons to select Download in Standby Mode, and then press the ENTER button.
2) Select On or Off.
• Off : If you select Off, the product will notify you with a pop up message when new upgrade software is available.
• On : If you select On, the product will automatically download new upgrade software when it is in Standby
mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it
when you turn the product on.
NOTE
To use the Download in Standby Mode function, your product must be connected to the Internet.

4.2.3. Cold Start Method (Initialize Setup)

1) This is useful for forgotten Parental Lock password.
2) Press "■" button on the front panel for over 5 seconds while 'no disc' status.
3) Then, VFD sign : "Initialize" → Power will be turned off automatically.
4) System Micom Cold Start :
During Stand-By, just press the Stop Button "■" for over 5 seconds. Then, the power LED will glitter.
Copyright© 1995-2011 SAMSUNG. All rights reserved.
4. Troubleshooting
4-23