Troubleshooting
4-3 Buyer-Region Code Setting Method
4-3-1 The inserting method of Region Code after replacing the Main PBA
[Reference]
-
When replacing the Main PBA and System Micom (MUIC1) should be inserted the region code.
-
The set is not working properly if you don't insert the region code.
-
The region code is inserted by the remote control.
1. Press the "AUX" button on the remote control.
2. Press the "MARKER" button on the remote control during 4~5
seconds.
3. After step (2), you can see "T-MODE" on the VFD and press
direction button "▼" during T-MODE.
Please remind that "T-MODE" indicator on the VFD is appeared for
a very short time.
4. After step (3), you can see "TEST − −" on the VFD.
Insert number "3", "3" to select Region Code.
4-38
T-MODE
TEST − −
Samsung Electronics