Buyer-Region Code Setting Method; Inserting The Region Code After Replacing The Main Pcb - Samsung HT-E350K Service Manual

4.4. Buyer-Region Code Setting Method

4.4.1.

Inserting the Region Code after replacing the Main PCB

NOTE
• When replacing the Main PBA and System Micom should be inserted the region code.
• The set is not working properly if you don't insert the region code.
• The region code is inserted by the remote control.
1) Press the "FUNCTION" and "Audio Assign" button on the remote control and go to AUX ANALOG mode.
2) Press the "TUNER MEMORY" button on the remote control during 4~5 seconds.
3) After step (2), you can see "TEST" on the VFD.
4) When you see "TEST" on VFD, Insert number "4", "6" to start Region Code setting mode.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
4. Troubleshooting
4-15