Using Surround Mode; Presetting Automatic Dvd Video Sound Increase Level; Changing The Scanning Mode - JVC CA-MXJD8UW Instructions Manual

Using Surround Mode

To activate Surround Mode
• For DVD/CD
AUTO MOVIE
STEREO
• For AUX/FM/AM/TAPE-A/TAPE-B
DANCE
STEREO
Auto Surround Mode*
AUTO • If Multi-channel surround signal comes
in, Multi-channel Surround Mode will
be selected.
• If Dolby Surround signal comes in,
Dolby Pro Logic II MOVIE mode will
be selected automatically.
• If 2-channel signal comes in, STEREO
mode will be selected.
Dolby Pro Logic II modes*
MOVIE Creates 5.1-channel sound field from 2ch
source.
This mode is suitable for movie source.
MUSIC
Creates 5.1-channel sound field from 2ch
source.
This mode is suitable for music source.
DSP modes*
DANCE
Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in
an outdoor stadium.
Stereo mode
STEREO Cancels the Surround Mode.
* If Multi-channel surround signal comes in, Multi-channel
Surround Mode will be selected automatically.
INFO
MUSIC DANCE
HALL
STADIUM
HALL
STADIUM
To adjust the DSP effect level
When one of the DSP modes is selected...
–
(holding then...)
Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower
level than for other discs and sources. You can set the
increase level for the currently loaded DVD Video, so you
do not have to adjust the volume every time you change the
source.
As the number increases, sound level also increases.

Changing the Scanning Mode

This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting "PROGRESSIV."
PROGRESSIV
PROGRESSIV
Progressive scanning. For a
progressive TV.
INTERLACE Interlaced scanning. For a
conventional TV.
• PROGRESSIVE indicator lights on when progressive
mode is selected.
Remote
ONLY
+
Increases the level
Decreases the level
Remote
INFO
ONLY
INTERLACE
21