Adjusting The Front Speaker Output Balance; Selecting The Sound Modes - JVC CA-MXJD8UW Instructions Manual

Adjusting the Front Speaker
Output Balance
You can adjust the output balance of left front speaker and
right front speaker within the range of R (right) –6
(minimum sound level from the right speaker) to L (left) –6.
L/R BALANCE
L
1
(holding then...)

Selecting the Sound Modes

You can select one of the preset Sound Modes.
ROCK
FLAT
SEA (Sound Effect Amplifier) modes
ROCK Boosts low and high frequency. Good for
acoustic music.
POP Good for vocal music.
CLASSIC Good for classical music.
User modes
USER 1/2/3
Your individual mode stored in memory.
See the next column "Creating Your Own
Sound Modes—User Mode."
FLAT No Sound Mode effect.
Creating Your Own Sound
Modes—User Mode
You can create your own Sound Modes to make sounds suit
your taste. The changed settings can be stored as the USER 1,
USER 2 and USER 3 modes.
1
Select one of the preset Sound Modes.
SOUND
MODE
ROCK
FLAT
20
Remote
ONLY
Decreases the left
R
front speaker output
2
level.
Decreases the right
front speaker output
level.
POP CLASSIC
INFO
Main Unit
ONLY
POP CLASSIC
2
Enter into the SEA Control Mode.
• You can enter the SEA Control Mode only while the
Sound Mode appears on the display.
TITLE
SET
/ DISPLAY
TITLE
3
Adjust the SEA pattern.
1 Select one of the tone—BASS
or TRE (treble).
2 Adjust the level of the selected
tone.
• You can adjust the bass and
treble level from –3 to +3.
3 Repeat steps 1 and 2 to adjust
the level of the other tone.
4 Finish the SEA pattern setting.
4
Select one of the User Modes.
PRESET
TITLE
5
Finish the setting.
SET
TITLE
/ DISPLAY
PRESET
TUNING
SET
/ DISPLAY