Changing The Picture Tone; Changing The Display Brightness - JVC CA-MXJD8 Instructions Manual

Changing the Picture Tone

While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1
Activate VFP.
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
On the TV screen
2
Select a preset picture tone.
NORMAL
Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see below).
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained above.
2
Select a parameter you want to adjust.
22
Remote
INFO
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST 0
SATURATION 0
0
0
TINT 0
0
0
0
SHARPNESS
0
0
NORMAL CINEMA
USER2 USER1
GAMMA Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or
dark as a whole (–8 to +8).
CONTRAST Adjust if the far and near position
is unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
5
Finish setting.

Changing the Display Brightness

You can dim the display window.
DIMMER
NORMAL
Remote
ONLY