Setting The Clock; Turning Off The Power Automatically - JVC CA-MXJD8 Instructions Manual

Setting the Clock

Main Unit
ONLY
Without setting the built-in clock, you cannot use Daily/
Recording Timers (see page 40) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
1
Activate clock setting mode.
CLOCK
/ TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2
Adjust the hour.
PRESET
3
Adjust the minute.
PRESET
Now the built-in clock starts working.
To check the current time during play
2
sec.
SET
/ DISPLAY
Source information
INFO
SET
/ DISPLAY
SET
/ DISPLAY
Clock

Turning Off the Power Automatically

With Sleep Timer, you can fall asleep listening to music.
1
Specify the time (in minutes).
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
Canceled
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press repeatedly, you can change the
shut-off time.
Remote
ONLY
SLEEP 120 SLEEP 90
SLEEP
23