Logging On To This Machine - Konica Minolta Bizhub 601 User Manual

13
14
Disconnect the authentication unit from this USB port of the computer.
15
Turn off the machine with the main power switch, connect the authentication unit, and then turn on the
machine with the main power switch.
– When the machine is turned off, then on again with the main power switch, wait at least 10 seconds
to turn the machine on after turning it off. The machine may not operate correctly if it is turned on
immediately after being turned off.
– Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
13.2.3

Logging on to this machine

Follow the procedures described below to log on to this machine by completing authentication with finger
vein patterns.
When "1-to-many authentication" has been specified
1
Position the registered finger on the authentication unit.
2
The user is authenticated, and the Basic screen appears.
13-20
Authentication Unit (Biometric Type AU-101)
bizhub 751/601 (Version 2)