Care Of Authentication Unit (Ic Card Type) Au-201 - Konica Minolta Bizhub 601 User Manual

Care of the machine
10.1.8

Care of Authentication Unit (IC Card Type) AU-201

Reminder
Before cleaning the authentication unit, disconnect it from the machine. If a force is applied to the USB
port, it may be damaged.
When cleaning the authentication unit, do not allow water to enter the authentication unit, otherwise the
system may be damaged.
Never use organic solvents, such as benzene or alcohol, to clean the authentication unit, otherwise it
may be damaged.
Note
When disconnecting or connecting the authentication unit, turn off the machine with the main power
switch, and then wait at least 10 seconds before turning it on again. The machine may not operate
correctly if it is turned on immediately after being turned off.
Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
Frequency: Once a month, or when it is dirty
Wipe the authentication unit with a soft, dry cloth. If the authentication unit cannot be cleaned by wiping it,
wash it with a cloth dampened with a mild detergent and wrung out well. After the authentication unit is
cleaned, rinse the cloth and wring it out well before wiping off the detergent.
bizhub 751/601 (Version 2)
10
10-7