Selecting The Video Signal - JVC CA-HXGD7 Instructions Manual

To connect digital audio
Before connecting optical digital cord, remove the
protective cap from the OPTICAL DIGITAL OUTPUT
terminal.
To connect other equipment
By using an stereo mini plug cord (not supplied), you can
connect equipment with analog audio output jacks such as an
MD player, a TV, etc.
Stereo mini plug cord (not supplied)
AUX
(front panel)
If the audio output on the other equipment is not stereo
mini plug type,
use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
IMPORTANT
Always set volume to MIN when connecting or
disconnecting the other equipment.
DO NOT plug in any equipment until all
connections are complete.

Selecting the Video Signal

When connecting a TV, you can use either one of the video
output terminals—COMPONENT or AV OUT.
After connecting the TV, set the video signal type correctly
O P T
I C A
for your TV.
D I G
L
I T A L
• Make sure the unit is not yet turned on. If it is already
O U T
P U T
Portable audio
device,
Game, etc.
turned on, turn off then on again so that the selector setting
becomes active.
VIDEO OUT
SELECT
Y/C
RGB
Y/C
Select for sending S-Video signals through the
AV OUT terminal or for sending component
video signals through the COMPONENT jacks.
RGB Select for sending the composite video signals
or RGB signals through the AV OUT terminal.
7