Table of Contents
Advertisement
CG-ARM7/RMD
1
Overview
1.1 Features
•
Connection of two physically separated
CAN networks
•
Filtering and mapping of identifiers
•
Bus activity displayed by LED
•
Gateway configuration via RS232 or CAN
•
Wiring using a multiway connector
1.2 General description
The CAN/CAN gateway CG-ARM7 connects
two physically divided CAN networks. The ca-
pability of having individual baudrates on both
segments, enables routing between them.
The filtering of single identifiers or ranges of
identifiers lessens the busload. The mapping
of single or ranges of identifiers qualifies
CG-ARM7 to be used under difficult higher
level protocol conditions.
The device is configured via serial interface or
via CAN network. Due to the intuitive structure
of the configuration file in ASCII format,
programming and administration is very easy.
1.3 Ordering information
12-20-401-10
User Manual
CAN/CAN - Gateway
CG-ARM7/RMD
1
Advertisement
Table of Contents
