EMS CG-ARM7 User Manual page 12

CG-ARM7/RMD
3. outff: Defines the frame format for outgoing
messages.
The frame format for outgoing messages spe-
cifies whether the result of the filtering rule is
sent via standard or extended identifier. If outff
is set to 's' standard frame format is specified.
When set to 'x' extended frame format is defi-
ned.
Structure of the filtering rule:
Now that the key defines to which message
the rule applies, further selections have to be
made. The filtering rule in turn specifies 3 crite-
ria:
... = sid [- eid] [: mid]
1. sid: Defines the identifier the filtering rule is
applied to.
If a range of identifiers is defined, sid is the
start identifier. If the prefix 'x' is before the va-
lue the identifier is interpreted as a hexadeci-
mal number.
2. eid: Defines the end identifier for ranges of
identifiers.
If no range of identifiers is used, the value is
not needed. If the prefix 'x' is before the value
the identifier is interpreted as a hexadecimal
number.
3. mid: Defines the mapping identifier.
The mapping identifier states the start identifer,
to which the single identifier or the range of
identifiers is mapped. Should the identifiers not
be mapped it is not needed to set this value. If
the prefix 'x' is before the value the identifier is
interpreted as a hexadecimal number.
User Manual
CAN/CAN - Gateway
9