EMS CG-ARM7 User Manual page 15

CAN/CAN - Gateway
Process selection:
In the right upper field of the configuration soft-
ware you choose the process, you want to
perform.
•
•
•
12
Program new configuration
With this process you can program a
new configuration to the device. Before
starting you have to select the configu-
ration you want to write to the gateway.
Remove configuration from device
This process deletes the current confi-
guration on the CG-ARM7. Afterwards
the gateway is in delivery state again. It
is not needed to delete the configuration
before a new one is programed, as this
is done automatically.
Read device information
Here information about the gateway and
the configuration within can be read out.
CG-ARM7/RMD
User Manual