Attach The Belt Clip; Use The Wrist Band - Uniden SSE P1 Owner's Manual

Attach the belt Clip

To attach a belt clip:
1. Line the belt clip with the grooves at
the side of the Pendant.
2. Then gently push until it snaps into
place.
To remove the belt clip:
Gently pull out the belt clip from one
groove and the other end will loosen on
its own.

Use the Wrist band

To attach a wrist band:
# The wrist band is attached to the Pendant with the help of the belt clip.
1. Insert one end of the wrist band into one of the slots on the belt clip and then
pull it out through the other end.
2. Next, attach the belt clip to the Pendant and then wrap the strap around your
wrist and keep it place with the help of the velcro fastener.
7