Recording The Outgoing Message; For Sse 37 - Uniden SSE P1 Owner's Manual

RECORDING THE OUTGOING MESSAGE

You can record a personal emergency message, in addition to the preset
recorded message, when the Pendant is registered to the SSE 35 and SSE 37
series. This will enable your family/friends to be able to identify your voice and
attend the call and it will also assure them that it is not a prank call.
# Your message can be up to 30 seconds long.
If you do not record a personal message, then the default message, "This is an
emergency call, to accept press the hash key on your telephone now" will play
when the Pendant dials out the emergency number.

For SSE 37

To record a message on the SSE 37 base, when the Pendant is registered to the
base, follow the steps given below.
1. Press and hold ON/OFF+DELETE keys on the base for 5 seconds.
2. The LCD displays, "To Start, press OK". Press OK.
- You will hear a prompt asking you to record your message.
3. Speak your message loud and clearly towards the front of the base, and
then to stop recording, press PLAY/STOP. It's recommended that you add the
instructions, "to answer this call, press the hash key on your telephone" to
your personal message.
- The Base will automatically playback the recorded message after recording.
The base then returns to the standby mode.
Playback the Recorded Message
1. Press and hold ON/OFF+REPEAT keys on the base for 5 seconds. The
LCD will display "playback" and the base starts to play the recorded
emergency message.
2. Press PLAY/STOP to stop playing the recorded emergency message.
If the emergency message has not been recorded, nothing will play.
If you want to delete the message, press DELETE when the message is
playing.
12