For Sse 35 - Uniden SSE P1 Owner's Manual

For SSE 35

To record a message on the SSE35 base, when the Pendant is registered to the
base, follow the steps given below.
1. Press and hold ON/OFF+DELETE keys on the base for 5 seconds.
2. The base plays the following instruction, "Record your Message".
- After playing the confirmation tone, the Base starts recording the
emergency message.
3. Speak your message loud and clearly towards the front of the base, and
then to stop recording, press PLAY/STOP. It's recommended that you add the
instructions, "to answer this call, press the hash key on your telephone" to
your personal message.
- The Base will automatically playback the recorded message after recording.
The base then returns to the standby mode.
Playback the Recorded Message
1. Press and hold ON/OFF+REPEAT keys on the base for 5 seconds. The base
starts to play the recorded emergency message.
2. Press PLAY/STOP to stop playing the recorded emergency message.
If the emergency message has not been recorded, nothing will play.
If you want to delete the message, press DELETE when the message is
playing.
13