Fitting Universal Child Seat - Ford Ka 2008 Owner's Handbook Manual

065-080 Ford KA GB 29-07-2008
All restraint devices must bear the type-
approval data along with the control
mark on a label that must be firmly
secured to the child seat and must
never be removed.
Over 1.50 m in height, from the point
of view of restraint systems, children
are considered as adults and have to
wear the standard seat belts.
Lineaccessori Ford includes child seats
for each weight group.
These devices are recommended having
been specifically designed for Ford cars.
70
15:32 Pagina 70
fig. 5
UNIVERSAL CHILD'S SEAT INSTALLATION
(WITH SEAT BELTS)
GROUP 0 and 0+
Babies up to 13 kg must be carried
facing backwards on a cradle seat,
which, supporting the head, does not
induce stress on the neck in the event
of sharp deceleration.
The cradle is restrained by the car seat
belts, as shown in fig. 5 and in turn it
must restrain the child with its own
belts.
The figures are indicative for assembly purposes only. Refer to the
instructions supplied with the child seat.
Some child restraint systems for weight group 0 and 1 have a rear attachment
and seat belts for securing the child. Due to their weight, they may be
dangerous if incorrectly mounted (e.g. if fastened to the car seat belts with a
cushion in between). Follow the assembly instructions carefully.
KA00048m fig. 6
GROUP 1
From 9 to 18kg of weight, children may
be carried facing forward. Some types
of seat are equipped with a front
cushion that enables the car seat belt to
restrain both child and seat fig. 6.
WARNING
KA00049m